Optimus SCP-103 owner manual Using AC Power

14-1255.fm Page 8 Tuesday, July 27, 1999 10:47 AM

Using AC Power

You can power the SCP-103 using a 3V, 300 mA AC adapter and a size H Adaptaplug® (neither supplied). Both are avail- able at your local RadioShack store.

Cautions:

You must use a Class 2 power source that sup-

!plies 3V DC and delivers at least 300 mA. Its center tip must be set to positive and its plug

must fit the SCP-103's DC 3V jack. Using an adapter that does not meet these specifications could damage the SCP-103 or the adapter.

•Always connect the AC adapter to the SCP-103 before you connect it to AC power. When you finish, disconnect the adapter from AC power before you disconnect it from the SCP-103.

Follow these steps to connect an AC adapter to the SCP-103.

1.Set the adapter's voltage switch to 3V.

2.Insert the Adaptaplug into the AC

adapter's socket. Line up TIP on the plug with +POS on the socket.

3. Insert the barrel plug into the SCP-103's DC 3V jack.

4.Plug the AC adapter into a stan- dard AC outlet.

8