Using The Alarm, Setting The Alarm Time

14-1255.fm Page 19 Tuesday, July 27, 1999 10:47 AM

USING THE ALARM

You can set the SCP-103 to automatically sound a beeping alarm at a time you select.

1.Press RADIO ON/OFF to turn off the radio. The display shows the currently set time.

2.Press ALARM. ALARM and the currently set alarm time flash.

ALARM

Note: If you do not press HOUR or MIN within 5 seconds, ALARM and the currently set alarm time stop flashing. If this happens, repeat Step 2.

3.Repeatedly press HOUR until the display shows the desired hour.

4.Repeatedly press MIN until the display shows the desired minute.

5.When the display shows the desired alarm time, wait until ALARM and the set alarm time stop flashing to allow the SCP-103 to store the setting.