4.Repeatedly press ∧/MINUTE until the display shows the
correct minute. To rapidly advance the minutes, hold down ∧/MINUTE.
(illus)
5.When the display shows the correct alarm time, either:
•Press MODE. The currently set time flashes for 10 sec- onds then appears steadily, or
•Wait for about 10 seconds until the newly set alarm time stops flashing. AL disappears from the display, then the currently set time appears.
Turning the Alarm On/Off
To turn on the alarm, press ON/OFF once. AL appears.
At the preset alarm time, the alarm sounds for about 10 min- utes, or until you press STOP. This stops the alarm beep, but leaves the alarm set to sound again the next day at the set time.
To turn off the alarm completely so it will not sound the next day, press ON/OFF so AL disappears from the display.
26
