Preparing Your Receiver
Notes:
•Be sure you connect the receiver’s right and left positive (+) and negative
(–)terminals to the speaker’s corre- sponding right and left positive (+) and negative
•Fully insert the speaker wires to ensure a good connection. Leave extra wire at the back of the receiver so you do not disconnect the wires when you move the receiver.
Caution: To prevent a short circuit, twist the end of each conductor to be sure that stray speaker wire strands do not touch other speaker terminals or any other receiver terminals.
Connecting the A and B Speakers
Follow these steps to connect the right speaker to the receiver’s right A SPEAK- ERS terminals.
1.Press the receiver’s A SPEAKERS R (+) red lever and insert the ridged or
2.Press the receiver’s A SPEAKERS R (– ) black lever and insert the other conductor’s end into the small hole. Pull back the lever to secure the con- ductor.
3.Connect the ridged or
4.Connect the remaining loose conductor to the right speaker’s negative
Repeat Steps 1 through 4 to connect the left speaker to the receiver’s A SPEAK- ERS L terminals.
Repeat this entire process to connect a second pair of speakers to the B SPEAKERS terminals.
SPEAKERS | |
R | L |
A | A |
B | B |
R | L |
|
|
|
|
|
B Speakers | Left |
| ||
A Speakers |
|
| Left | |
|
|
7