Basic Operation

Using FM Mono

To receive FM stations in stereo, press FM MONO until MONO disappears from

 

the display. STEREO appears on the display when you receive an FM broadcast

 

in stereo.

 

You can improve the reception of weak FM stations by pressing FM MONO until

 

MONO appears. This reduces noise while you listen to a weak FM station, but

 

you get monaural instead of stereo sound.

Balance Control

The BALANCE control lets you adjust the sound balance between the left and right speakers. If you properly position the speakers and your listening area is centered between them, the center control setting is usually best (see “Position- ing Speakers” on Page 5).

For an unusual speaker placement, adjust BALANCE as follows:

1.Select TUNER. Then press FM/AM to select the FM band.

2.Press FM MONO until MONO appears. The sound is monaural instead of stereo, so each speaker delivers the same output.

3.Turn BALANCE until you hear the sound coming equally from each speaker when you are in the listening area.

4.Press FM MONO until MONO disappears from the display.

Muting the Receiver

To temporarily mute the sound, press MUTING on the remote control. MUTING appears. Press MUTING again to restore the audio level.

Using Headphones

To listen with headphones (not supplied), insert the headphones’ 1/4-inch plug into the receiver’s front panel PHONES jack. To silence the speakers, set A and B SPEAKERS to the out position.

Listening Safely

To protect your hearing, note the following when using headphones.

Set the volume to its lowest setting before you begin listening. After you begin listening, adjust volume to a comfortable level.

Do not listen at extremely high volume levels. Extended high- volume listening can lead to permanent hearing loss.

Once you set the volume, do not increase it. Over time, your ears adapt to the volume level, so a volume level that does not cause discomfort might still damage your hearing.

Cassette Deck Features

You can connect two cassette decks to the receiver. Selecting either TAPE 1/ VCR or TAPE 2 MONITOR lets you hear the playback from the cassette deck you connected to the receiver’s corresponding (TAPE 1/VCR, TAPE 2 MONITOR) jacks.

15

Page 15
Image 15
Optimus STA-3500 owner manual Using FM Mono, Balance Control, Muting the Receiver, Using Headphones, Cassette Deck Features

STA-3500 specifications

The Optimus STA-3500 is a high-performance, compact stereo amplifier that has gained popularity among audiophiles and home theater enthusiasts. Known for its exceptional sound quality and robust construction, the STA-3500 is designed to deliver impressive audio performance without compromising on style or functionality.

One of the standout features of the STA-3500 is its efficient Class D amplification technology. This technology allows the amplifier to deliver high power output while maintaining low heat generation and energy consumption. The STA-3500 can produce up to 50 watts per channel into an 8-ohm load, making it suitable for driving a wide range of speakers, from compact bookshelf models to larger floor-standing units.

The amplifier is equipped with advanced circuitry that ensures minimal distortion and enhanced audio clarity. It utilizes sophisticated filtering techniques, which contribute to a clean, dynamic sound, making it an excellent choice for music enthusiasts who demand the best audio experience. The STA-3500 also features a wide frequency response, allowing it to reproduce low bass notes and high-frequency details with precision.

In terms of connectivity, the STA-3500 provides multiple input options, including RCA and AUX inputs, making it versatile for various audio sources such as CD players, smartphones, and TVs. Additionally, it includes speaker outputs that are compatible with standard banana plugs, spade connectors, or bare wire, ensuring seamless integration into any audio setup.

The build quality of the STA-3500 is another highlight. The amplifier is housed in a sturdy metal chassis that not only enhances its durability but also helps reduce electromagnetic interference. Its sleek design, complete with a brushed aluminum front panel, allows it to fit elegantly into any contemporary audio system.

Lastly, the Optimus STA-3500 features user-friendly controls, including a volume knob and input select switch located on the front panel. This accessibility makes it easy for users to adjust settings on the fly, enhancing the overall listening experience.

In summary, the Optimus STA-3500 is a powerful and compact stereo amplifier that combines advanced Class D technology with high-quality construction. With its impressive power output, minimal distortion, and versatile connectivity options, it stands out as a top choice for anyone looking to elevate their audio experience.