Optimus STAV-3680 Using the Remote Control, AUDIO/SURROUND Switch, Receiver/Amplifier Section

TEST TONE

C. MODE

AUDIO/SUR-

Using the Remote Control

The remote control works up to a distance of about 23 feet, and within a 30-de- gree angle on either side of the receiver. Point the control at the receiver’s front panel and press the desired button(s).

Many buttons on the remote control work the same as buttons on the receiver’s front panel. Use these buttons exactly as you would use the corresponding but- tons on the receiver.

AUDIO/SURROUND Switch

Some buttons on the remote control have two functions. Set the

ROUND switch to AUDIO to activate the function printed in green on the remote control’s panel. Set the switch to SURROUND to use the function printed in gold.

For example, the button marked andoperates as the center mode adjust when you set the switch to SURROUND and as the test tone function when you set the switch to AUDIO.

Receiver/Amplifier Section

SURROUND

DISC AUDIO

			CD
RANDOM BEST		ASMS
	TAPE
DECK1	DECK2
STATION		CLASS	FM MONO
REAR		C.MODE
CENTER		TEST
LEVEL		TONE
PRO	5-D	SFC	MUTINTG
LOGIC	THEATER	MODE
	TAPE2	LOUD
FUNCTION MONITOR
RECEIVER	POEWR		MASTER
	CD	TAPE	VOLUME

STAV-3680 AUDIO/VIDEO

SYSTEM REMOTE OSR

Ρεχειϖερ/

Αμπλιφιερ

Σεχτιον

+MASTER VOLUME – C. MODE

TEST TONE

–CENTER +

–REAR +

SFC MODE

5-D THEATER

PRO LOGIC

LOUD.

TAPE 2 MONITOR

FUNCTION

RECEIVER POWER MUTING

CLASS

FM MONO

STATION

Adjusts the system’s volume. See Page 14.

Selects among the four center mode settings with AUDIO/ SURROUND set to SURROUND. See Page 21.

Sounds test tones from each speaker with AUDIO/SURROUND set to AUDIO. See Page 21.

Controls the relative volume of the center speaker with AU- DIO/SURROUND set to AUDIO. See Page 21.

Controls the relative volume of the rear speakers with AUDIO/ SURROUND set to SURROUND. See Page 21.

Selects between Studio Effect or Arena Effect, or turns the SFC mode off. See Page 20.

Selects between 5-D Pro Logic or 5-D Surround, or turns the 5-D function off. See Page 20.

Turns the Dolby Pro Logic Surround on and off. See Page 20.

Boosts/cuts high and low frequency sounds at low listening levels. See Page 15.

Switches the receiver to monitor the source connected to the TAPE 2 MONITOR jacks. See Page 18.

Selects a program source (VCR/Tape 1, DVD/TV, LD/SAT, CD, tuner, or phono). Repeatedly press FUNCTION until the display shows your desired program source. See Page 14.

Turns the receiver on and off. See Page 14.

Silences the receiver. Press again to restore the sound to its previous level. See Page 15.

Selects the receiver’s memory class with AUDIO/SURROUND set to AUDIO. See Page 16.

Selects the FM reception mode with AUDIO/SURROUND set to AUDIO. See Page 17.

Press to tune to the next higher or lower memory location with AUDIO/SURROUND set to AUDIO. See Page 16.

23