INTRO Scanning
The INTRO (introduction) scanning feature lets you review the first 10 sec- onds of each track on all loaded CDs. To use the INTRO scanning feature, simply press INTRO SCAN. INTRO ap- pears on the display, and the CD changer plays the first 10 seconds of each track on all loaded CDs, begin- ning with the first track on the lowest numbered CD.
Note: You can search forward or back- ward during INTRO scanning.
To cancel INTRO scanning and stop play, press STOP. The CD stops and INTRO disappears from the display.
To cancel INTRO scanning without stopping play, press INTRO SCAN again. INTRO disappears, and the CD changer resumes normal play from the beginning of the current track.
22
Repeat Play
The System 734 lets you continuously repeat a single track, all tracks on a loaded CD, or a programmed se- quence of tracks (see “Programmed Play”).
To continuously repeat a single track, press REPEAT once before or during play so REPEAT1 appears on the dis- play.
To continuously repeat all tracks on the selected CD, press REPEAT twice before or during play so REPEAT ap- pears on the display.
To continuously repeat a programmed sequence, first program the tracks you want to play, then press REPEAT twice before or during play so REPEAT ap- pears on the display along with PRO- GRAM.
To cancel repeat play before, during, or after play, press REPEAT so RE- PEAT or REPEAT1 disappears from the display. If repeat is cancelled dur- ing play, the CD changer resumes nor- mal play.
