4.To store the selected track, press PROGRAM again. The memory position number automatically increases by 1 to indicate it is ready to store the next track. For example, after you press PRO- GRAM to store the track in
5.Repeat Steps 2-4 to store up to 32 tracks.
Note: If you try to store more than 32 tracks, the CD changer auto- matically begins reviewing the tracks already stored, beginning with the first track (see “Reviewing a Programmed Sequence”). C- (check) appears on the display, followed by memory position num- ber (01, for example). This infor- mation remains on the display until you begin programmed play.
6.Press PLAY/PAUSE to play the programmed sequence. The selected disc number flashes on the CD changer, the first pro- grammed track number and t appear, then the programmed track begins to play and its elapsed play time appears on the display.
24
Notes:
•To briefly stop programmed play, press PLAY/PAUSE. appears on the display. To resume programmed play, press PLAY/PAUSE again. disappears.
•Pressing DISC SKIP has no effect during programmed play.
7.Programmed play automatically stops at the end of the last pro- grammed track. To stop the CD changer at any time during pro- grammed play, press STOP. t and the CD’s elapsed play time disappear, then the total number of tracks and playing time appear.
Notes:
• Repeat Step 6 to play the pro- grammed sequence again.
• To replace a programmed track, press PROGRAM until the memory position number of the track you want to replace appears on the display. Then repeat Steps