4. Press RECORD on TAPE 1 and PLAY/PAUSE on the CD changer at the same time to begin record-
ing. |
|
|
| disappears, | t appears |
|
|
along with the CD’s elapsed play time, PLAY locks down along with RECORD, and the tape begins recording.
Notes:
•You cannot change the function while RECORD is pressed down
•To briefly stop the tape while recording, press PAUSE on TAPE 1. The button locks and the tape stops. Press PAUSE again to resume recording.
•To briefly stop the CD while recording, press PLAY/PAUSE on the CD changer. appears on the display. To resume play, press PLAY/
PAUSE.
5.To listen to the CD during record- ing, adjust VOLUME, or VOLUME s/ t on the remote control, and select the desired
30
6.The System 734 automatically stops the tape when it reaches the end. To stop the tape at any time during recording, press STOP/ EJECT on TAPE 1.
To stop the CD during or after recording, press STOP on the CD changer.
Note: The System 734 automati- cally stops the CD changer when it reaches the end of all loaded CDs or the programmed sequence. If the tape is still recording, press STOP/EJECT on TAPE 1 to stop the tape.
Copying Cassette Tapes
The System 734 lets you dub (copy) one cassette tape to another, one side at a time, using its dual cassette decks (TAPE 1 and TAPE 2).
1.Repeatedly press FUNCTION until t appears next to TAPE on the
display.
2. Load a blank cassette tape, or one you want to record over, into TAPE 1.
3. Load the tape you want to record from into TAPE 2.