Optimus manual XTS 20AV 2-WaySatellite Swivel Speaker System, Speaker Placement, Connections

40-2086.fm Page 1 Thursday, July 1, 1999 12:23 PM

Cat. No. 40-2086

XTS 20AV 2-Way Satellite Swivel Speaker System

Your Optimus XTS 20AV 2-Way Satel- lite Swivel Speaker System delivers big sound from a small package! The innovative dual speaker design lets you swivel the top speaker for a smooth mix of direct and reflected sound.

Your speakers are ideal as part of a home surround-sound system, and are magnetically shielded so you can place them next to your TV or comput- er display without interference.

Note: If possible, place the front edge of the speakers flush with the front edge of the shelf.

Wall Mounting

The mounting holes on the back of the speakers let you mount the speakers on a wall bracket or stand (available at your local RadioShack store).

SPEAKER PLACEMENT

For the best sound:

•Place the speakers so the dis- tance between them is about the same as the distance between the listening area and a point halfway between the speakers.

•Avoid floor locations. (Floor cover- ings can absorb sound.)

Flat Surface Mounting

The ideal location is on a table or shelf positioned near the corner of a room. A shelf attached to a wooden wall (or other acoustically hard surface) great- ly reinforces the sound.

CONNECTIONS

Your local RadioShack store has a wide selection of speaker wire. We recom- mend you use color-coded or marked wire to help you correctly connect the wire. Most color-coded wires have a stripe running down one of the conduc- tors and marked wires have ridges along one of the conductors.

© 1999 Tandy Corporation.

All Rights Reserved.

Optimus and RadioShack are registered trademarks used by Tandy Corporation.