Usage Notice
Precautions
Follow all warnings, precautions and maintenance as recom- mended in this user’s guide to maximize the life of your unit.
Warning | - | Do not look into the projector’s lens when the |
|
| lamp is on. The bright light may hurt your eyes. |
Warning | - | To reduce the risk of fire or electric shock, do not |
|
| expose this product to rain or moisture. |
Warning | - | Please do not open or disassemble the product |
|
| as this may cause electric shock. |
Warning | - | When changing the lamp, please allow unit to |
|
| cool down, and follow all changing instructions. |
Warning | - | This product will detect the life of the lamp |
|
| itself. Please be sure to change the lamp when it |
|
| shows warning messages (refer to page 34). |
Warning | - | Reset the “Reset Lamp Hours” function from the |
|
| On Screen Display “Management II” menu after |
|
| replacing the lamp module (refer to page 25). |
Warning | - | When switching the projector off, please ensure |
|
| the projector completes its cooling cycle before |
|
| disconnecting power. |
Warning | - | Turn on the projector first and then the signal |
|
| sources. |
Warning | - | Do not use lens cap when projector is in opera- |
|
| tion. |
Warning | - | When the lamp reaches the end of its life, it will |
|
| burn out and may make a loud popping sound. |
|
| If this happens, the projector will not turn back |
|
| on until the lamp module has been replaced. To |
|
| replace the lamp, follow the procedures listed |
|
| under “Replacing the Lamp”. (see page 35) |
English
