Firmware Upgrade Procedure | Optoma HD8000 |
Step 1
Power off the projector and disconnect all the cables. Do not plug in the power cord until told to later in one of the steps.
Step 2
To download the firmware upgrade software, go to the HD8000 product page. On the
where the file is saved). Unzip the zip file→ that was saved to your computer.
Step 3
Connect the Optoma HD8000 to the PC with the
Step 4
Open the HD8000 firmware folder (if it is not already open). Double click on the executable file called “FlashUpgrader4Bin. exe.” This will run the HD8000 firmware upgrade program.