Charge the Battery
1
When the LED indicator lights red, the battery is low. Replace the battery immediately or connect the power adapter to charge the battery.
1. | Insert the plug. () |
2. | Connect the charger. (~) |
3. | During charging, the LED indicator |
| lights amber. () |
Switch On / Off
IN
DC
UNIVERSAL |
|
|
I/O | RE | SET |
Press the Power button for 3 seconds to switch the projector on or off.
For first time use, the Language screen
appears. |
| |
1. | Highlight the desired language. | |
| ( | ) |
2. | Select the item. ( ) | |
|
|
|
| 2 |
|
|
|
| IN |
|
|
|
| DC |
UNIVERSAL |
|
|
| ET |
I/O |
|
| RES | |
|
|
|
| |
| 3 |
|
|
|
| 4 |
|
|
|
|
|
|
| IN |
|
|
|
| DC |
| UNIVERSAL | I/O |
| RESET |
The battery will not charge |
while the projector is operating. |
Turn the projector off. |
4. The LED Charge Indicator lights |
green when the battery is fully |
charged. This process may take up |
to 2.5 hours. |
<Note>
1.For LED indicator information, see page
2.After the projector is turned off, the battery may not start charging right away due to over temperature protection. The projector will automatically start charging once it cools off.
3.The battery has a lifespan and ages every time it is charged and discharged. It will gradually loose its charging capability as it ages. Replace the battery at the end of its lifespan.
Connect Input Source - VGA
DC IN | Connect the VGA device. (~) |
UNIVERSALI/O | Insert the universal connector |
1 | with the arrow mark facing up. |
2
Connect input source - Video in
Connect input source Data transfer
|
|
| D |
| UNIVERSALI/ |
| T |
| O | RESE |
|
1 |
|
|
|
2 |
|
|
|
|
| or | |
1 | UNIVERSALI/O |
|
|
|
|
| |
1.Connect the AV input source. (~)
2.Connect external speakers to the audio out connector of the projector. ()
<Note>
1. All other brand and product names are |
trademarks or registered trademarks of their |
respective companies. |
2. The cables connecting the video output |
devices are not supplied, please contact the |
device vendor. |
3. iPod nano/iPod touch/iPhone/iPod classic |
(version 5 and above) |
4. Designed for iPod/iPhone/Mobile phone/ |
PMP with TV out functions. Using with |
devices with audio signal voltage > 0.3Vrms |
is not recommended. |
5. The optional USB cable for iPod |
Connector is used to charge the iPod device |
using a computer. |
| IN | |
DC | 1 | |
UNIVERSAL I/O | ||
| ||
2 |
|
Connect a laptop or PC using the supplied Male USB Cable to transfer data to the Projector internal memory or the inserted microSD card. After connecting, switch the projector on.
<Note>
The laptop/PC can only detect the input source when the projector is switched on. The projection will stop when this connection is made.
2 |
|
|
|
|
| or |
|
1 | UNIVERSALI/O | REs | ET |
2 |
|
|
|
4 |
|
|
|
3 | UNIVERSAL | I/O |
| ||
|
| R |
Insert MicroSD Card
RESET 
| micro | SD |
DC |
| |
IN |
|
|
PK120 is designed to project image from the internal memory or via a microSD card.
Insert a microSD card into the slot with the gold contacts facing down.
<Note>
•• To remove the microSD card, push the card to eject it from the slot.
•• Do not remove the microSD card while the projector is projecting image from the card. This can cause data loss or damage the card.
•• Supports microSD card size up to 32GB.
