Optoma Technology TX5423D Appendices, Image is out of focus, Image is too small or too large

Appendices

Image is out of focus

Make sure the lens cap is removed.

Adjust the Focus Ring on the projector lens.

Make sure the projection screen is between the required distance.

See page 17.

The image is stretched when displaying 16:9 DVD title

When you play anamorphic DVD or 16:9 DVD, the projector will show the best image when the projector display mode is set to 16:9 in the OSD.

If you play 4:3 format DVD titles, please change the format to 4:3 in the projector OSD.

If the image is still stretched, you will also need to adjust the aspect ratio by referring to the following:

Please setup the display format as 16:9 (wide) aspect ratio type on your DVD player.

Image is too small or too large

Adjust the Zoom Ring on the top of the projector.

Move the projector closer to or further from the screen.

Press “Menu” button on the remote control or projector panel, go to “Display  Format” and try the different settings.

Use of Keystone is not recommended.

Image has slanted sides

If possible, reposition the projector so that it is horizontally centered on the screen and below the bottom of the screen.

Press “Keystone +/-” button on the remote control or press “ / ” on the projector panel, until the sides are vertical.

Image is reversed

Select “SETUP  Projection” from the OSD and adjust the projection direction.

English 50