Optoma Technology TX5423D Powering On/Off the Projector, Powering On the Projector, English 4

Installation

(*) When power saving mode is enabled, the VGA & Audio pass-through, RS-232 and RJ-45 will be de-activated during standby mode.

Powering On/Off the Projector

Powering On the Projector

. Remove the lens cap. 

2.Securely connect the power cord and signal cable. When connected, the ON/STANDBY LED will turn Amber.

3.Turn on the lamp by pressing “” button either on the top of the projector or on the remote. The ON/STANDBY LED will now turn Green. 

The startup screen will display in approximately 0 seconds.

The fi rst time you use the projector, you will be asked to select the preferred language and power saving mode.(*)

4.Turn on and connect the source that you want to display on the screen (computer, notebook, video player, etc). The projector will detect the source automatically. If not, push menu button and go to “OPTIONS”.

Make sure that the “Source Lock” has been set to “Off”.

If you connect multiple sources at the same time, press the “SOURCE” button on the control panel or direct source keys on the remote control to switch between inputs.

2 Power

POWER

?

Turn on the projector fi rst and

then select the	 Lens Cap
signal sources.

English 4