THE MAGNETIC DISC CLAMP
Operation
•Place the compact disc on your Oracle CD turntable.
•Install the magnetic disc clamp
To Remove the Magnetic Disc Clamp (option 1)
•Lift the compact disc by holding it from the periphery with the magnetic disc clamp installed.
To Remove the Magnetic Disc Clamp (option 2)
•Lift the magnetic disc clamp straight up. The compact disc will follow because of the adhesion of the Urethane vibration damping trap to the compact disc surface.
Caution! Since the adhesion will diminish as the Urethane picks up dust, it is important to place your hand under the compact disc to prevent it from falling. Please read the recommended maintenance procedure below.
•Peel the disc from the clamp, this will break the close seal between the Urethane vibration damping trap and the compact disc.
Maintenance
Your Oracle player is equipped with a very efficient magnetic clamp. One of the key features of this clamp is the proprietary Urethane compound ring that acts as a vibration damping tap. To obtain optimal performance, keep the surface of the Urethane vibration damping trap clean at all times using your Brilliance cleaner or denatured alcohol (mentholated spirits).
To extend the cleaning cycle to a maximum, we recommended not setting the magnetic disc clamp with the Urethane facing down as dust would very quickly reduce the adhesion to the compact disc, thus lowering the vibration damping trap efficiency.
Oracle Audio Technologies | 12 |
CD 2500 MK II player / CD 2000 transport Owner’s manual
