P312 Broadband Security Gateway

Menu 24.10 - System Maintenance - Time and Date Setting

Use Time Server when Bootup= None

Time Server IP Address= N/A

Current

Time:

00

:

00 :

00

New

Time (hh:mm:ss):

00

:

04

:42

Current

Date:

2000

-

01

-

01

New

Date (yyyy-mm-dd):

2000

-

01

-

01

Time Zone= GMT+0800

Press ENTER to Confirm or ESC to Cancel:

Press Space Bar to Toggle.

Figure 11-6 System Maintenance – Time and Date Setting

Table 11-3 Time and Date Setting Fields

Field

Description

Use Time Server when

Enter the time service protocol that your timeserver will send when the

Bootup=

Prestige powers up. Choices are Daytime (RFC 867), Time (RFC-868),

 

NTP (RFC-1305)and None. The main differences between them are the

 

format, e.g., the Daytime (RFC 867) format is day/month/date/year/time

 

zone of the server while the Time (RFC-868)format gives a 4-byte

 

integer giving the total number of seconds since 2000/1/1 at 0:0:0. The

 

NTP (RFC-1305)format is similar. Not all timeservers support all

 

protocols, so you may have to check with your ISP/network administrator

 

or use trial and error to find a protocol that works. If you select None

 

(this is the default value), you can enter the time manually but each time

 

the system is booted, the time & date will be reset to 2000/1/1 0:0:0.

 

 

Time Server IP

Enter the IP address of the your timeserver. Check with your

Address=

ISP/network administrator if you are unsure of this information.

Current Time:

 

 

 

New Time

Enter the new time in hour, minute and second format.

 

 

Current Date:

 

New Date

Enter the new date in month, date and year format.

 

 

Time Zone= GMT+0800

Press the [SPACE BAR] to set the time difference between your time

 

 

System Maintenance & Information

11-5

Page 142
Image 142
ZyXEL Communications P-312 manual System Maintenance & Information 11-5