ZyXEL Communications P-312 manual System Status, Menu 24.1 System Maintenance Status

P312 Broadband Security Gateway

9.1System Status

The first selection, System Status, gives you information on the version of your system firmware and the status and statistics of the ports, as shown in the figure below. System Status is a tool that can be used to monitor your Prestige. Specifically, it gives you information on your system firmware version, number of packets sent and number of packets received.

To get to the System Status:

Step 1. Enter number 24 to go to Menu 24 - System Maintenance.

Step 2. In this menu, enter number 1 to open System Maintenance - Status.

Step 3. There are three commands in Menu 24.1 - System Maintenance - Status. Entering 1 drops the WAN connection, 9 resets the counters and [Esc] takes you back to the previous screen.

The table below describes the fields present in Menu 24.1 - System Maintenance - Status. It should be noted that these fields are READ-ONLY and are meant to be used for diagnostic purposes. The upper right corner of the screen shows the time and date according to the format you set in Menu 24.10 (Figure 11-6).

		Menu 24.1 - System Maintenance - Status					23:10:28
						Sat. Jan. 01, 2000
Port	Status	TxPkts	RxPkts	Cols	Tx B/s	Rx B/s	Up Time
WAN	10M/Half	67	289	0	74	64	2:20:56
LAN	10M/Half	299	220	0	74	64	2:20:54

Port:	Ethernet Address	IP Address	IP Mask	DHCP
WAN	00:a0:c5:21:8c:a3	x.y.155.97	255.255.255.0	Client
LAN	00:a0:c5:21:8c:a2	192.168.1.1	255.255.255.0	Server

System up Time: 22:11:43

Name: xxx.baboo.mickey.com

Routing: IP

ZyNOS F/W Version: V_0712_ 7/12/2000

Press Command:

COMMANDS: 1-Drop WAN 9-Reset Counters ESC-Exit

Figure 9-2 Menu 24.1 - System Maintenance – Status

9-2 System Information & Diagnosis