ZyXEL Communications P-312 manual Menu 3.2.1 IP Alias Setup, IP Alias Setup Menu Fields

P312 Broadband Security Gateway

Field	Description	Example
Edit IP Alias	The Prestige supports three logical LAN interfaces via its single	Yes
	physical Ethernet interface with the Prestige itself as the gateway for	No (default)
	each LAN network. Press the space bar to toggle No to Yes, then
	press [ENTER] to bring you to menu 3.2.1

When you have completed this menu, press [Enter] at the prompt [Press ENTER to Confirm…] to save your configuration, or press [Esc] at any time to cancel.

3.2.1 IP Alias Setup

You must use Menu 3.2 to configure the first network and move the cursor to the Edit IP Alias field and press [SPACE BAR] to choose Yes and press [ENTER] to configure the second and third network. Pressing [Enter] opens Menu 3.2.1 - IP Alias Setup, as shown next.

Menu 3.2.1 - IP Alias Setup

IP Alias 1= No

IP Address= N/A

IP Subnet Mask= N/A

RIP Direction= N/A

Version= N/A

Incoming protocol filters= N/A

Outgoing protocol filters= N/A

IP Alias 2= No

IP Address= N/A

IP Subnet Mask= N/A

RIP Direction= N/A

Version= N/A

Incoming protocol filters= N/A

Outgoing protocol filters= N/A

Enter here to CONFIRM or ESC to CANCEL:

Press Space Bar to Toggle.

		Figure 3-5	Menu 3.2.1 - IP Alias Setup
Follow the instructions in the following table to configure IP Alias parameters.
		Table 3-3	IP Alias Setup Menu Fields
	Field		Description	Example
	IP Alias	Choose Yes to configure the LAN network for the Prestige.		Yes
	IP Address	Enter the IP address of your Prestige in dotted decimal notation		192.168.2.1
	IP Subnet	Your Prestige will automatically calculate the subnet mask based		255.255.255.0
	Mask	on the IP address that you assign. Unless you are implementing
		subnetting, use the subnet mask computed by the Prestige

Internet Access 3-7