ZyXEL Communications P-312 manual Fields in Menu 11.1 Pptp Encapsulation

	P312 Broadband Security Gateway
Menu 11.1 - Remote Node Profile
Rem Node Name= ChangeMe	Route= IP
Active= Yes
Encapsulation= PPTP	Edit IP= No
Service Type= Standard	Telco Option:
Service Name=N/A	Allocated Budget(min)= 0
Outgoing=	Period(hr)= 0
My Login=	Schedules=
My Password= ********	Nailed-up Connections=
Authen= CHAP/PAP
	Session Options:
PPTP :	Edit Filter Sets= No
IP Addr=	Idle Timeout(sec)= 100
Server IP Addr=
Connection ID/Name=
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.

Figure 4-3 Remote Node Profile for PPTP Encapsulation

The next table shows how to configure fields in Menu 11.1 not previously discussed above.

	Table 4-3		Fields in Menu 11.1 (PPTP Encapsulation)
Field			Description	Examples
Encapsulation		Toggle the space bar to choose PPTP. You must also go to		PPTP
		Menu 11.3 to check the IP Address setting once you have
		selected the encapsulation method.
IP Addr(ess)		Enter the IP address of the WAN Ethernet port.		10.0.0.140
Server IP		Enter the IP address of the ANT modem.		10.0.0.138
Addr(ess)
Connection		Enter the connection ID or connection name in the ANT. It		N:My ISP
ID/Name		must follow the “c:id” and “n:name” format.
		This field is optional and depends on the requirements of your
		xDSL Modem.
Schedules		You can apply up to four schedule sets here. For more details
		please refer to the Call Schedule Setup chapter.
Nailed-Up		This field specifies if you want to make the connection to this
Connection		remote node a nailed-up connection.

Remote Node Setup 4-5