P312 Broadband Security Gateway
Creating Custom Rules 16-11
Figure 16-5 Adding/Editing Source & Destination Addresses
Table 16-4 Adding/Editing Source & Destination Addresses
Field Description Option
Address Type Do you want your rule to apply to packets with a particular
(single) IP, a range of IP addresses (e.g., 192.168.1.10 to
192.169.1.50), a subnet or any IP address? Select an option
from the drop down list box
Single Address
Range Address
Subnet Address
Any Address
Start IP Address Enter the single IP address or the starting IP address in a range
here.
End IP Address Enter the ending IP address in a range here.
Subnet Mask Enter the Subnet Mask here, if applicable.