ZyXEL Communications P-312 manual Fields in Menu 11.1 PPPoE Encapsulation Specific

P312 Broadband Security Gateway

Table 4-2	Fields in Menu 11.1 (PPPoE Encapsulation Specific)
Field	Description	Examples
Authen	This field sets the authentication protocol used for	CHAP/PAP
	outgoing calls.
	Options for this field are:
	CHAP/PAP - Your Prestige will accept either CHAP or
	PAP when requested by this remote node.
	CHAP - accept CHAP only.
	PAP - accept PAP only.
Telco Option:	The field sets a ceiling for outgoing call time for this	10
Allocated Budget	remote node. The default for this field is 0 meaning no
	budget control.
Period(hr)	This field is the time period that the budget should be	1
	reset. For example, if we are allowed to call this remote
	node for a maximum of 10 minutes every hour, then the
	Allocated Budget is (10 minutes) and the Period(hr) is
	1 (hour).
Nailed-Up	This field specifies if you want to make the connection to
Connection	this remote node a nailed-up connection. For more
	details please refer to the next section.
Idle Timeout	This value specifies the idle time (i.e., the length of time	100 seconds
	there is no traffic from the Prestige to the remote node)	(default)
	in seconds that can elapse before the Prestige
	automatically disconnects the PPPoE connection. This
	option only applies when the Prestige initiates the call.

4.1.3 PPTP Encapsulation

If you change the Encapsulation to PPTP in Menu 11.1, then you will see the next screen. Please see the appendix for information on PPTP.

4-4 Remote Node Setup