ZyXEL Communications P-312 manual Fields in Menu

P312 Broadband Security Gateway

	Table 4-1	Fields in Menu 11.1
Field		Description	Examples
Rem Node Name	Enter a descriptive name for the remote node. This field can		LAoffice
	be up to eight characters.
Active	Press the [SPACE BAR] to toggle between Yes and No and		Yes
	activate (deactivate) the remote node.
Encapsulation	Ethernet is the default encapsulation. Press the [SPACE		Ethernet
	BAR] if you wish to change to PPPoE encapsulation.
Service Type	Press the [SPACE BAR] to select from Standard, RR-		Standard
	Toshiba (RoadRunner Toshiba authentication method) or
	RR-Manager(RoadRunner Manager authentication
	method). Choose one of the RoadRunner methods if your
	ISP is Time Warner's RoadRunner; otherwise choose
	Standard.
Service Name	This is valid only when you have chosen PPPoE		poellc
	encapsulation. If you are using PPPoE encapsulation, then
	type the name of your PPPoE service here.
Outgoing: My	This field is applicable for PPPoE encapsulation only. Enter		jim
Login	the login name assigned by your ISP when the Prestige
	calls this remote node. Some ISPs append this field to the
	Service Name field above (e.g., jim@poellc) to access the
	PPPoE server.
Outgoing: My	Enter the password assigned by your ISP when the Prestige		*****
Password	calls this remote node. Valid for PPPoE encapsulation only.
Server IP	This field is valid for RoadRunner service type only. The
	Prestige will find the RoadRunner Server IP automatically if
	this field is left blank. If it does not, then you must enter the
	authentication server IP address here.
Route	This field refers to the protocol that will be routed by your		IP
	Prestige – IP only for the P312.
Edit IP	This field leads to a “hidden” menu. Press the [SPACE BAR]		Yes
	to select Yes and press [ENTER] to go to Menu 11.3 -
	Remote Node Network Layer Options.
Session Options:	This field leads to another “hidden” menu Use the [SPACE		Yes
Edit Filter sets	BAR] to toggle this field to Yes and press [ENTER] to open
	Menu 11.5 to edit the filter sets. See the Remote Node Filter
	section for more details.

4-2 Remote Node Setup