ZyXEL Communications P-312 Internet Access Setup, Ethernet Encapsulation, Only/Out Only, RIP-1

P312 Broadband Security Gateway

RIP Direction	Press the space bar to select the RIP direction from None, Both/In	None
	Only/Out Only.
Version	Press the space bar to select the RIP version from RIP-1/RIP-	RIP-1
	2B/RIP-2M.
Incoming	Enter the filter set(s) you wish to apply to the incoming traffic
Protocol Filters	between this node and the Prestige.
Outgoing	Enter the filter set(s) you wish to apply to the outgoing traffic
Protocol Filters	between this node and the Prestige.

When you have completed this menu, press [Enter] at the prompt [Press ENTER to Confirm…] to save your configuration, or press [Esc] at any time to cancel.

3.3Internet Access Setup

You will see three different Menu 4 screens depending on whether you chose Ethernet, PPTP or PPPoE Encapsulation.

3.3.1 Ethernet Encapsulation

You must choose the Ethernet option when the WAN port is used as a regular Ethernet. The PPPoE choice is for a dial-up connection using PPPoE. If you choose Ethernet in Menu 4 you will see the next screen.

Menu 4 - Internet Access Setup

ISP's Name= ChangeMe

Encapsulation= Ethernet

Service Type= Standard

My Login= N/A

My Password= N/A

Login Server IP= N/A

IP Address Assignment= Dynamic

IP Address= N/A

IP Subnet Mask= N/A

Gateway IP Address= N/A

Network Address Translation= Full Feature

Press ENTER to Confirm or ESC to Cancel:

Figure 3-6 Menu 4 – Internet Access Setup (Ethernet)

3-8 Internet Access