ZyXEL Communications P-312 manual Third Party FTP Clients -General fields

P312 Broadband Security Gateway

Connected to 312.x.x.x

220 P312 FTP version 1.0 ready at Thu Jan 20 18:00:02 2000 User (312.x.x.x:(none)): <Enter>

331 Enter PASS command Password:

230 Logged in ftp> bin

200 Type I OK

ftp> put p312e.bin ras 200 Port command okay

150 Opening data connection for STOR ras

226 File received OK

ftp: 327680 bytes sent in 1.10Seconds 297.89Kbytes/sec. ftp> quit

Figure 10-8 FTP Session Example

The system reboots after a successful upload.

The following table describes some of the fields that you may see in third party FTP clients.

	Table 10-3	Third Party FTP Clients –General fields
Host Address	Enter the address of the host server.		Parameters for
			Prestige
Login Type	Anonymous.		Normal
	This is when a user I.D. and password is automatically
	supplied to the server for anonymous access. Anonymous
	logins will work only if your ISP or service administrator has
	enabled this option.
	Normal.
	The server requires a unique User ID and Password to login.
Transfer Type	Transfer files in either ASCII (plain text format) or in binary		Binary
	mode.
Initial Remote	Specify the default remote directory (path).
Directory.
Initial Local	Specify the default local directory (path).
Directory.

FTP over WAN will not work if:

1.You have disabled Telnet service in Menu 24.11.

2.You have applied a filter in Menu 3.1 (LAN) or in Menu 11.5 (WAN) to block Telnet service.

3.The IP you entered in the Secured Client IP field in Menu 24.11 does not match the client IP. If it does not match, the Prestige will disconnect the Telnet session immediately.

4.You have an SMT console session running.

5.The firewall is active. The default firewall policies block all traffic from the WAN, so to enable FTP over the WAN, you must turn the firewall off (Menu 21.2) or create a firewall rule to allow FTP from the WAN.

Transferring Files 10-9