MAINTENANCE

!WARNING:

ONLY QUALIFIED MAINTENANCE PERSONNEL ARE TO PERFORM THE FOLLOWING REPAIRS.

VACUUM MOTOR REPLACEMENT

1.Turn off all switches and unplug machine.

2.Remove recovery tank.

3.Locate the vacuum motor wires and disconnect at the connector.

4.Remove the vacuum motor.

5.Reverse process to install vacuum motor.

Vac Motor Carbon Brushes Replacement

 

End Cap

Carbon Brushes

WARNING: The green

 

ground wire must be

 

attached for safe

 

operation.

 

See wiring diagram.

Note: When replacing carbon vac motor brushes loosen wire terminal BEFORE removing screws on bracket.

If armature commutator is not concentric, extremely pitted, or grooved the motor will need to be replaced or sent to a qualified service center to restore vac

SOLUTION PUMP REPLACEMENT

1.

Turn off all switches and unplug the

 

machine.

2.

Remove recovery tank.

3.

Remove solution hoses from fittings in

 

pump.

4.

Remove the (2) screws that fasten the

 

pump to the frame.

5.

Reverse process to install pump.

performance.

Wire Terminal

Important:

These brushes wear quicker as the length shortens due to increased heat.

Spring inside brush housing will damage motor if brushes are

allowed to wear away completely.

Wire

Terminal

Note: Place stop in groove.

3/8

Periodically check the length of the carbon brushes. Replace both carbon brushes when either is less than 3/8" long.

D-250 98828 04/08/03

8

Page 9
Image 9
Windsor D250 (115V) manual Maintenance, Vacuum Motor Replacement

D250 (115V) specifications

The Windsor D250 (115V) is a powerful and versatile floor scrubber designed to meet the cleaning needs of various commercial environments. Known for its durability and efficiency, the D250 is an excellent choice for facilities management in schools, warehouses, retail spaces, and healthcare settings.

One of the standout features of the Windsor D250 is its compact design. This makes it easy to maneuver in tight spaces and provides superior cleaning capabilities even in hard-to-reach areas. The unit is built with a high-performance motor that delivers consistent power, ensuring it can tackle heavy-duty cleaning tasks without compromising performance.

Equipped with a dual scrub deck, the D250 utilizes two counter-rotating brushes that improve dirt and stain removal. This technology allows for effective scrubbing without the hassle of frequent brush changes or complicated maintenance. The scrub deck can be easily adjusted depending on the surface type, allowing for versatility in cleaning applications from smooth floors to textured surfaces.

The D250 features a user-friendly control panel that simplifies operation. With intuitive controls, even staff with minimal training can quickly become proficient in using the machine. Additionally, the adjustable handle provides ergonomic benefits, reducing operator fatigue during prolonged use.

In terms of water management, the Windsor D250 incorporates an efficient solution distribution system. This ensures optimal water usage, minimizing waste while maximizing cleaning efficiency. The recovery tank design is also noteworthy; it features an easy-to-empty design that facilitates the swift removal of dirty water, accelerating the cleaning process.

The D250 is designed for durability with high-quality materials that enhance its lifespan. Furthermore, its low noise operation makes it suitable for use in noise-sensitive areas, allowing cleaning to take place without disrupting regular activities.

For maintenance, the Windsor D250 requires minimal intervention. With access to components such as brushes and filters easily available, routine maintenance becomes a straightforward task. This aspect of design not only saves time but also reduces operational costs.

Overall, the Windsor D250 (115V) is a commendable floor scrubber that combines innovative technology with user-friendly features. Its robust construction, effective cleaning capacity, and ease of use make it a reliable choice for any commercial cleaning environment. Whether for heavy-duty applications or routine maintenance, the D250 is engineered to get the job done efficiently while ensuring the highest standards of cleanliness.