Windsor D250 (115V) manual Troubleshooting Cont, Technical Specifications, Power Type

TROUBLESHOOTING CONT.

Solution hose	Corrosion on fittings	Clean with steel wool.
fitting hard to		Soak in acetic acid (white vinegar).
connect		Lubricate lightly with silicone base
		lubricant.
Carpet not	Severe soil conditions	Make several passes at right angles to
getting clean.		other. Use a prespray.
Carpet too wet	Over saturation	Adjust solution pressure to lower setting.
		Make several passes without spray.
Carpet browning	Leaving carpet too wet	Check for loss of vac pressure.
	Too much chemical in	Check label for correct solution
		concentration.	.
Solution not	Solution hose connection	Check for positive connection
flowing properly	Faulty pump	Repair or replace.
	Faulty floor tool valve	Repair or replace.
	Faulty pump switch	Repair.

TECHNICAL SPECIFICATIONS

POWER TYPE

ELECTRICAL: 115 V, 60 Hz, 15 Amps per power cable ((D250) 230 V, 50 Hz, 15 Amps (D250IE)

ELECTRIC VACUUM MOTOR: (1) –2/1.25 HP, 2 stage, Waterlift –150” (381cm)

SOLUTION PUMP: 250 psi, adj.

SOLUTION CAPACITY: 17 gallons (64.3ltr)

RECOVERY CAPACITY: 15 gallons (56.75ltr)

GENERAL DIMENSIONS/WEIGHT

WEIGHT: 97 lbs. ( 44 kg)

LENGTH: 20” (50.80 cm)

HEIGHT: 36” (91.44 cm)

WIDTH: 16” (40.64 cm)

POWER CABLE: 2-25’(6.35 m) (D250) 1-25' (6.35 m) (D250IE)

D-250 98828 04/08/03 10