Use
1.Unwrap the cord around the bottom of the cord wrap area.
2.Plug the cord into the electrical socket.
3.Attach the tool you need for your cleaning job to the end of the extension wand.
4.Press the button on the extension wand for more length if needed.
5.Slide the power switch to the ON position.
6. Begin vacuuming.
5
4
1
2
3
7.Slide the power switch to the OFF position.
8.Unplug the power cord.
9.Wrap the cord around the cord wrap area and store.
Note: The Ultimate Handheld Vacuum has a MOTOR
PROTECTION SYSTEM: If fine materials such as soot, cement, plaster dust, copy machine powder, etc. are picked up, the bag surface may seal and cause the motor to shut off to avoid overheating. If this happens, turn the switch off and unplug the cleaner. If full, replace disposable inner bag. Check and clear any clogs in hose or accessories. After approximately thirty minutes the motor will have cooled and the cleaner will be ready to use.
IMPORTANT: The cleaner must remain unplugged for thirty
11minutes for motor to cool and system to reset.