The micro filter is extra protection against dust and dirt getting into the vacuum motor. To keep your vacuum running in top condition you will want to change the micro filter when it gets dirty.
To replace the micro filter:
1.Follow steps
4.To remove the Micro Filter, lift up on the recessed finger tab and pull out.
5.Remove the Micro Filter from the Micro Filter Frame.
6.Replace by pressing a new Micro Filter onto the tab located on the underside of the Micro Filter Frame.
7.Insert the Micro Filter Frame into the housing under the ribs located at the back of the housings, and locate the rear tab between the ribs.
8.Insert the inner bag back into place, and close the inner bag door.
IMPORTANT: Never remove the white gasket surrounding the inner bag opening. The vacuum will leak air and not
run properly.
4 |
| 4 |
|
|
| TAB |
|
| TAB |
5 |
| HOLE | 6 |
| HOLE |
|
| ||||
|
|
|
|
7 |
| 7 |
|
13