Service problems that appear to be major can often be solved easily. You can be your own troubleshooter by reviewing this guide. All other servicing should be done by an Oreck authorized service center.
Problem | Check | Solution | |
Vacuum will | • Not plugged in | • Be sure cleaner is | |
not run | properly | firmly plugged into | |
| • No electricity in | wall outlet. | |
|
| ||
| wall outlet. | • Reset circuit | |
| • Motor protector | breaker/ground | |
| fault interrupter, or | ||
| tripped. | ||
| replace fuse. If you | ||
| • Needs service. | ||
| need assistance | ||
|
| contact a licensed | |
|
| electrician. | |
|
| • See Motor Protec- | |
|
| tion System | |
|
| page 11. | |
|
| • Visit or call your | |
|
| nearest service | |
|
| center. | |
|
|
| |
Vacuum will not | • Inner bag is full. | • Replace the Inner | |
pick up or has | • Hose/wand tool is | bag. See Replacing | |
low suction. | the Disposable In- | ||
clogged. | |||
| ner Bag, page 12. | ||
| • Air leak due to | ||
| • Remove | ||
| missing or | ||
| obstructions. | ||
| damaged gasket. | ||
|
| ||
|
| • Replace the white | |
|
| bag gasket. | |
|
|
| |
Extension wand | Proper friction fit | Push and twist the | |
and tools will | not being obtained. | tools together to | |
not stay together. |
| properly attach. | |
|
|
|
15