E N G L I S H
Adjusting or Replacing Brushroll
WARNING: Unplug cord from electrical outlet before servicing.
Your Oreck Vacuum has a brushroll that can be replaced after heavy use for improved performance.
16Remove the baseplate by removing 5 screws. Then, remove the belt and brushroll from the housing.
17Snap the new brushroll into place.
18Reassemble the belt.
16Reassemble the baseplate.
If a previous adjustment has already been made and bristle height does not extend above the baseplate, a new brush assembly should be ordered.
16 | 17 |
|
18
Replacing Light Bulbs
16emoveR the baseplate by removing 5 screws.
19Remove the belt from the brushroll pulley. Then, remove the brushroll from the housing.
20Remove the fascia by removing 2 screws.
21Rotate fascia away from the power head and lift it away.
22Pull burned out bulb from holder and replace with new bulb.
21Reassemble the fascia.
19Reassemble the brushroll and belt.
16Reassemble the baseplate.
19 |
20 | 21 |
22
7
