BEFORE OPERATING CLEANER, READ ALL INSTRUCTIONS IN THIS MANUAL CAREFULLY.
Table of Contents |
|
|
Table of Contents, |
|
|
Maintenance & Customer Service, |
|
|
Important Safety Instructions | page | 2 |
Important Safety Instructions, Warranty . . . | page | 3 |
Operating Instructions, |
|
|
Troubleshooting Guide | page | 4 |
Hardwood Floor Cleaning Procedure, |
|
|
Dry Cleaning Carpets | page | 5 |
Scrubbing Procedure, |
|
|
Refinishing Floors | page | 6 |
Stripping Procedure, |
|
|
Carpet Bonnet Cleaning Procedure . . . . . page | 7 | |
Sandscreening Procedure, |
|
|
Accessories | page | 8 |
Maintenance & |
|
|
Customer Service |
|
|
Your ORECK floor cleaner is a product of precise engineering. If you require additional information or have problems with your ORECK appliance, you may call ORECK customer service at:
UK: 0800 67 68 69
Please specify the model number and serial/code number which can be found on the data plate on the side of the orbiter.
Save your sales or purchase slip. Should your ORECK appliance require warranty service in the U.S.A., present this slip to the Authorized Service Center as your proof of purchase date or, in Canada, call customer service.
IMPORTANT
SAFETY INSTRUCTIONS
When using an electrical appliance, basic precautions should always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE
USING THIS FLOOR MACHINE
WARNING
To reduce the risk of fire, electric shock, or injury:
•Use indoors only.
•Risk of explosion - Floor sanding can result in an explosive mixture of fine dust and air. Use floor sanding machine only in well ventilated area.
•Do not allow to be used as a toy. Close attention is necessary when used by or near children.
•Do not leave appliance unattended when plugged in. Unplug from outlet when not in use and before servicing.
•Use only as described in this manual. Use only manufacturer’s recommended attachments.
•Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center or call customer service at UK: 0800 67 68 69
•Do not pull or carry by cord, use cord as a handle, close door on cord, or pull cord around sharp edges or corners. Keep cord away from heated surfaces.
•Do not run appliance over cord.
•Use extra care when cleaning on stairs.
•Connect to a properly grounded outlet only. See grounding instructions.
•Unplug before installing or removing pads/cleaning brushes.
•Warning - To reduce the risk of fire, use only commercially available floor cleaners and waxes intended for machine application.
•Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
•Do not handle plug or appliance with wet hands.
•Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair and anything that may reduce air flow.
•Keep hair, loose clothing, fingers and all parts of body away from openings and moving parts.
•Turn off all controls before unplugging.
•Do not use appliance in an enclosed space where flammable, explosive or toxic vapors are given off by oil base paint, paint thinner, some mothproofing substances, or in an area where flammable dust is present.
SAVE THESE INSTRUCTIONS
CAUTION
This appliance must be connected to a grounded metal, permanent wiring system; or an equipment- grounding conductor must be run with the circuit conductors and connected to the equipment- grounding terminal or lead on the appliance.
ALWAYS UNPLUG THE MACHINE BEFORE INSTALLING OR REMOVING ACCESSORIES.
ALWAYS WEAR SHOES WHEN USING
ELECTRICAL EQUIPMENT.
2
