Scrubbing Procedure

Residential Use

This procedure can be used on most types of hard floor surfaces,

EXCEPT WOOD FLOORS.

EQUIPMENT AND MATERIALS REQUIRED:

1.Orbiter floor machine

2.Drive Pad Holder

3.Brown scrub pad

4.Orange scrub brush

5.Broom or dust mop

6.Cleaning solution

7.Small brown pad - HINT: Use “donut hole” from brown scrub pad.

8.Mops - 2 each (1 to apply/pick up cleaning solution and 1 to rinse floor)

9.Bucket and wringer

10.Wet-Dry vacuum (optional)

PROCEDURE:

1.Sweep floor area to be cleaned (broom or dust mop).

2.Mix cleaning solution according to manufacturer’s instructions on container label for proper solution mixture.

3.Apply cleaning solution in a 6’ x 6’ area.

4.Let solution stand for 5 minutes, scrub floor with Orbiter floor machine, pad holder and brown pad.

5.Use scrub brush on floors with cracks and crevices.

6.Use small brown pad to reach in corners and around door jambs.

7.Pick up dirty solution with mop or wet-dry vacuum.

DO NOT ALLOW CLEANING SOLUTION TO DRY ON FLOOR.

8.Repeat Steps 3-6 until all floor area is cleaned.

9.Rinse floor area TWICE with clean water and clean mop.

10.Allow floor area to dry before applying new floor finish.

PRECAUTIONS:

1.Do not flood the floor area with cleaning solution or allow solution to dry before pick-up.

2.Use clean mop for final rinse.

3.Change rinse water frequently.

4.Use damp cloth to wipe off any splashes on walls or furniture.

Refinishing Floors

Residential Use

This procedure can be used on most types of hard floor surfaces,

EXCEPT WOOD FLOORS.

EQUIPMENT AND MATERIALS REQUIRED:

1.Orbiter

2.Drive Pad Holder

3.White Polish Pad

4.Floor finish liquid

5.Clean string mop, 16-20 oz. size

6.Bucket and wringer

7.Disposable plastic bag

PROCEDURE:

1.Place disposable bag inside of bucket with wringer. This will protect floor finish from being contaminated and chemical residue remaining in bucket.

2.Pour quart size container of floor finish into the disposable bag. Amount of floor finish depends on size of floor area to be covered and number of coats to be applied.

3.Dip the mop tip ONLY into the floor finish and wring out lightly. Avoid dripping floor finish or splashing on walls.

4.Apply floor finish in thin even coats. Apply FIRST COAT of floor finish along baseboard edges and cover remaining floor area in an east-west direction.

HINT: Only first coat of floor finish need be applied to baseboard edges.

5.Allow floor finish to dry 20 minutes before applying second coat.

6.Apply second coat of floor finish 1 tile width out from baseboard. Application should be in a crossing direction to the preceding coat.

7.Additional coats (3 and 4) of floor finish should be applied to achieve the level of appearance desired. Four coats of floor finish will provide extra protection to the floor surface.

8.Allow 24 hours for floor finish to harden before buffing.

9.Buff floor to higher shine using Orbiter, Drive Pad Holder and white polish pad.

PRECAUTIONS:

1.When using NEW mops to apply floor finish, make sure to rinse mop first. Foreign chemicals will affect the floor finish.

2.Completely submerging mop head into the floor finish is a waste of product.

3.Turn mop over frequently for even distribution of floor finish.

4.Do not allow mop to become dry; this will cause streaking.

5.Apply floor finish in thin even coats.

6.Do NOT pour floor finish and attempt to spread evenly. This will cause dark spots and delay drying time.

6

Page 5 Page 7
Page 6
Image 6
Oreck ORB480 Scrubbing Procedure, Refinishing Floors, Sweep floor area to be cleaned broom or dust mop, Precautions
Page 5 Page 7

ORB480 specifications

The Oreck ORB480 is a versatile and powerful floor cleaning machine designed to meet various cleaning needs in both residential and commercial settings. It stands out due to its unique combination of lightweight design and robust performance, making it an ideal choice for users seeking efficient cleaning solutions.

One of the main features of the Oreck ORB480 is its advanced orbital technology. Unlike traditional rotary floor machines that can leave streaks and require intense effort to maneuver, the ORB480 employs a 360-degree oscillating motion. This technology allows for superior cleaning without unintended damage to floor surfaces, providing a gentle yet effective clean. The machine's dual-speed settings enable users to adjust the cleaning power according to the specific surface being treated, making it suitable for a variety of flooring materials including hardwood, tile, vinyl, and carpets.

Another noteworthy characteristic of the Oreck ORB480 is its lightweight design, tipping the scales at just 24 pounds. This portability makes it easy for users to transport and handle the machine with ease, allowing for efficient maneuverability in tight spaces. The ergonomic handle further enhances user comfort, enabling extended cleaning sessions without causing fatigue.

The machine also features a versatile range of cleaning pads, including scrubbing pads, polishing pads, and bonnet pads. This adaptability ensures that users can tackle any cleaning task, from deep scrubbing and stripping wax to polishing and buffing floors to a high shine. The pads are also easy to change, making it simple to switch between cleaning tasks.

Equipped with an efficient 1.5-horsepower motor, the Oreck ORB480 delivers consistent power and performance. The machine is designed for durability, featuring high-quality materials that are built to withstand heavy use, which is especially beneficial for businesses or high-traffic areas.

In terms of maintenance, the Oreck ORB480 is designed for easy upkeep, allowing users to keep the machine in optimal working condition with minimal effort. Its compact design allows for convenient storage, making it a practical addition to any cleaning arsenal.

Overall, the Oreck ORB480 combines advanced cleaning technologies with user-friendly features, making it an exceptional choice for anyone seeking an effective and reliable floor care solution.
Top Page Image Contents