
Trouble- shooting
Service problems that appear to be major can often be solved easily. You can be your own troubleshooter by reviewing this guide.
All other servicing should be done by an Oreck authorized service center.
Problem
Check
Solution
Unit does not | • Power Cord | • Plug in Power Cord |
turn ON | • Selector Switch | • Set Selector Switch for desired blower |
| ||
| • Top Cover | speed. |
|
| |
|
| • Make sure the top cover is securely closed |
|
|
|
Truman Cell | Truman Cell | • A solid red light is a 30 day cleaning |
light has turned |
| reminder. Wash Collector Cell. Make sure |
solid red. |
| it is thoroughly clean and dry before |
|
| reinstalling. |
|
|
|
Truman cell | Truman Cell | • A blinking red indicates the power supply |
light is |
| has shut down due to arcing or short |
blinking red |
| circuit. The cell should be inspected and |
|
| cleaned, repaired, or replaced. |
|
|
|
Unit does | Truman Cell | • Clean the Truman Cell and make sure it is |
not remove |
| completely dry before reinstalling. |
pollutants. |
| • Truman cell may be damaged. Contact |
|
| |
|
| Oreck for service. |
|
|
|
Unit sparks, | Truman Cell | • Sparking or popping noise (arcing) can |
crackles and |
| occur when a large particle is captured |
pops. |
| in the Truman Cell. If the unit is arcing |
|
| excessively, the cell may be dirty. Try |
|
| cleaning the Truman Cell. |
|
| • If excessive arcing continues after |
|
| proper cleaning, the Truman Cell may |
|
| be damaged or wet. If damaged, contact |
|
| Oreck for service. |
|
|
|
11