Left safety lock button
Thermostat indicator light
Turn the Steamer ON
!WARNING!
Steam may cause serious injury if in contact with body parts. Ensure the filler cap is seated properly and tight, and the safety lock button on the hose handle is engaged before turning the steamer ON.
Always direct the trigger away from the user and away from any bystanders.
Important! The red indicator on the filler cap is a safety device. It will push out when there is steam pressure in the boiler and go back in when it is safe to refill the boiler tank. Do not attempt to remove the cap when the indicator is pushed out. Turning the unit off and depressing the trigger will assist in reducing pressure in the system.
1. Insert the power plug into a polar- ized electrical outlet.
2. Check the filler cap is seated properly and tight.
3. Engage the trigger lock by pushing the safety lock button on the left side of the hose handle.
4.Press down on the ON/OFF button.
The power and thermostat indicator will illuminate.
Important! Turning the unit off and depressing the trigger will assist in reducing pressure in the system.
Power light 
Red indicator
Filler cap
It takes approximately five minutes to reach the correct temperature. The thermostat indicator light turns off when the correct temperature has been reached.
| Tip! |
ON/OFF button | Filling the unit |
with hot water will |
reduce the preheat
time.
15
