1 | 2 | Upper | 3 | 4 | 5 |
|
| Handle |
|
|
|
6 | 7 | 8 | 9 |
|
|
| ENFONCEZ JUSQU’À |
|
|
| ENTENDRE UN BRUIT |
|
|
| PRESIONEA HAST |
|
|
| ESCUCHAR UN |
|
|
| CHASQUIDO DE SUJECI |
fig. 1 | Before assembling appliance, remove two screws |
| from the connector assembly. Remove cardboard |
| insert by pulling upward. |
fig. 2 | Slide upper handle section over matching section |
| of the connector assembly. Insert short screw into |
| top hole and long screw into the bottom hole then |
| tighten firmly until handle is no longer loose. |
General Information
Make sure disposable paper filter dust bag is in place. operate the cleaner without a paper filter dust bagDO.
PlugNOT the power cord into an electrical outlet and press the
operOn
fig. 3 | Place foot on power head and lean handle back |
| |
| gently to release lock for vacuum use. Return |
| handle to the full upright position to engage lock. |
NOTE: Do not operate the unit while in the upright and | |
locked position. Do not let the unit run while in any one | |
stationary position for any period of time. Keep the unit | |
moving while in operation. | |
fig. 4 | Wrap power cord around cord hook on handle |
For Easy Power Cord Storage
and cord hook on connector. Secure to “U” shaped part on plug.
|
| To Replace Filter |
|
|
| Dust Bag |
|
|
| WARNING: Unplug cord from electrical outlet |
|
|
| before servicing. |
|
| fig. 5 Unzip outer bag completely. |
| |
| fig. 6 | Pull bag cardboard collar to release bag dock |
|
|
| door from connector. Bag dock door will hinge |
|
|
| downward. |
|
| fig. 7 | Gently pull bag cardboard collar upward out of |
|
|
| the bag dock. |
|
|
| Bag Installation |
|
|
|
|
|
| fig. 8 | Slide the cardboard collar completely into bag |
|
|
| dock door. |
|
| fig. 9 | Firmly push bag dock door with both thumbs on |
|
|
| indication point until it snaps. |
|
Using An Oreck Fresh Air® Tab
Your ORECK XL vacuum cleaner has a special FRESH AIR® tab pocket. This
4