Oreck XLS465A Servicing Double-Insulated Appliances, To Set-Up Cleaner, Polarization Instructions

Polarized Plug

Servicing of

Double-Insulated Appliances

A double-insulated appliance is marked with one or

To Set-Up Cleaner

The ORECK STEEMER cleaner is designed for fast and easy set-up:

more of the following: The words “Double Insulation” or “Double Insulated” or the double-insulation symbol

( ). In a double-insulated appliance, two systems of insulation are provided instead of grounding. No grounding means is provided on a double-insulated appliance, nor should a means for grounding be added to the appliance. Servicing a double-insulated appliance requires extreme care and knowledge of the system and should be done only by qualified service personnel. Replacement parts for a double- insulated appliance must be identical to the parts they replace.

POLARIZATION INSTRUCTIONS

To reduce the risk of electric shock, the ORECK STEEMER model is equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into

5

A

Pinch

Latch

6

C B

STEP 1: Swing the wheels away from the nozzle into the operating position.

Remove the two-tier tank from the cleaner by pinching the gray and red latch together, and then gently lowering the latch toward the nozzle.

Do Not Force! (Figure 5)

STEP 2: Push the two-tier tank downward toward the nozzle and lift out (Figure 6).

a polarized outlet only one way. This is a safety feature. If you are unable to fit the plug fully into an outlet, try reversing the plug. If the plug should still fail to fit, contact a

qualified electrician to replace the obsolete outlet. Do not defeat the purpose of the polarized plug in any way.

A.L.C.I

The ORECK STEEMER is made to double-insulated specifications and is equipped with an A.L.C.I. (Appliance Leakage Circuit Interrupter). The A.L.C.I. shuts off the unit in potentially hazardous situations. The A.L.C.I. has a Test and Reset button which should be operated each time the unit is plugged in. Do not remove the tag which provides

	Lift Out and Lower
7		STEP 3: To fill the supply
		tank with clean water,
		open the gray tank cap.
		Fill the tank with lukewarm
Fill Line		tap water to the fill line,
		as noted on the side of the
		tank (Figure 7).

CAUTION: Do not overfill tank or use water that is too hot to touch. Do not put any type of shampoo/cleaner into the supply tank. Other carpet

shampoo will leave residues in the cleaner that will over a short period of time clog the dispensing system and void your warranty. Use only STEEMER Full Release™ Professional Carpet Cleaner cartridges, which are specifically formulated to be residue-free.

test instructions from around the cord at the A.L.C.I. (A.L.C.I. may vary from illustration).

DANGER: Improper installation of A.L.C.I. can result in electric shock.

Do not modify or by-pass the A.L.C.I. Do not replace any electrical component in this product with anything other than an authorized ORECK replacement part. The risk of electric shock can result if used in the vicinity of improperly grounded stationary appliances (stove, refrigerator, washer, etc.).

Reset Switch

Test Button	Instructional Tag
	DO NOT REMOVE

8

A B

C

STEP 4: Close gray cap and place the tank back on the cleaner (Figure 8). Lift the gray latch to slide the tank upward into position until you hear a “click,” signaling that the tank is securely locked into place.

6