EN
record, press SINCE. The date will appear on the bottom line of the display.
To clear the existing commencing date and reset it to start again, press and hold SINCE. The total rainfall and today rainfall will be reset to zero and the unit will start again to collect the rainfall data.
RAINFALL ALARM
The rain alarm value can be displayed at any time by pressing RAIN 
.
To set the rainfall alarm:
1.Press and hold RAIN 
for two seconds.
2.Use HISTORY / UP or DOWN to set the desired value.
3.Press RAIN 
to confirm. The alarm will be activated.
The rain alarm indicator will light up.
The alarm will go off for one minute when the rainfall reaches the preset value and the rain alarm indicator will flash. A reminder beep will be emitted every minute. Once the rain alarm is on the indicator will not stop flashing unless RAIN 
is pressed or the rain alarm value is changed. To stop the alarm and reminder beep, press any button or change the rainfall alarm value.
To toggle the alarm ON / OFF, press RAIN 
ON / OFF.
6
SIGNALS
If without obvious reason the main unit display goes blank, press and hold SEARCH for 2 seconds to enforce an immediate search of the rain collector.
ICON | DESCRIPTION |
|
|
| No signal |
|
|
| Searching for signal |
|
|
| Signal connected |
|
|
If that fails, check:
•The remote rain collector is still in place.
•The batteries of the main unit and rain collector have not run out of power. Replace them if necessary.
•The transmission is within range and path is clear of obstacles and interference. Shorten the distance if necessary.
Then press SEARCH again.
CALENDAR CLOCK
The calendar clock is displayed on the bottom line of the display. Use MODE to toggle between clock, calendar and daily alarm.
To set the clock:
1.Press MODE to display the clock or calendar.
2.Press and hold MODE for two seconds and use HISTORY / UP or DOWN to set the desired clock or calendar value.
RGR682_M_EN_R1.indd 6
2006.8.2 10:18:53 AM 
