IMPORTANT NOTE – (spark arrester):

As a precautionary measure against possible flying sparks, always take a Class B fire extinguisher with you when operating this log splitter in dry areas. This log splitter is equipped with an internal combustion engine and should not be used on or near any unimproved forest-covered, brush-covered or grass-covered land unless the engine’s exhaust system is equipped with a spark arrester meeting applicable local or state laws (if any). If a spark arrester is used, it should be maintained in efffective working order by the operator. In the state of California, a spark arrester is required by law. Other states have similar laws. Federal laws apply on federal lands. A spark arrester muffler is optional and available as an accessory at your nearest engine dealer. Always check the legal requirements in your area.

TOWING SAFETY

NEVER attempt to move your log splitter over hilly or uneven terrain without a tow vehicle or adequate help.

NEVER carry any cargo or wood on your log splitter.

NEVER allow anyone to sit or ride on your log splitter.

NEVER exceed 45 mph when towing your log splitter. Towing the log splitter at speeds higher than 45 mph could result in loss of control, damage to the equipment, or serious injury or death. Adjust towing speed for terrain and conditions. Be extra cautious when towing over rough terrain, especially railroad crossings, and avoid sharp turns and steep angles when towing your log splitter.

NEVER exceed weight capacity of ball or load limits of coupler.

ALWAYS confirm coupler tightness each time before towing and after towing 50 miles.

ALWAYS disconnect your log splitter from the towing vehicle before operating it.

ALWAYS be careful when backing up with your log splitter in tow. It could jackknife.

ALWAYS allow for added length of your log splitter when turning, parking, crossing intersections and in all driving situations.

ALWAYS use safety chains when towing your log splitter.

ALWAYS check all local and state regulations regarding towing, licensing, and lights before towing your log splitter.

ALWAYS check before towing to make sure that the log splitter is correctly and securely attached to the towing vehicle and that the safety chains are secured to the hitch or bumper of the vehicle with enough slack to allow turning. Always use a Class I, 2” ball with this log splitter.

ALWAYS replace ball or coupler if damaged.

ALWAYS turn the fuel shut off valve on the engine to the “OFF” position before towing the log splitter. Failure to do so may result in flooding the engine.

Page 6

Page 7 Page 9
Page 8
Image 8
Oregon S402022H0/S402022K0 owner manual Towing Safety
Page 7 Page 9

S402022H0/S402022K0 specifications

Oregon S402022H0 and S402022K0 are two advanced weather stations designed for both hobbyist meteorologists and professionals alike. These models are part of Oregon Scientific’s commitment to providing high-quality, reliable weather monitoring solutions that cater to a wide range of users.

One of the main features of the S402022H0 and S402022K0 is their ability to deliver accurate real-time weather data. Equipped with high-precision sensors, these devices can measure temperature, humidity, atmospheric pressure, wind speed, and rainfall. This comprehensive data collection allows users to gain insights into local weather patterns, essential for planning outdoor activities or managing agricultural practices.

Both models stand out due to their user-friendly interfaces, featuring clear LCD screens that display the weather data in an easily readable format. Additionally, these weather stations often come with wireless capabilities, allowing the sensors to communicate with the main unit without cumbersome wiring. This feature enhances the installation flexibility, as sensors can be placed in optimal locations without concern for running wires back to the display unit.

Another significant technological advancement in the Oregon S402022H0 and S402022K0 is support for connectivity with mobile devices. Users can often sync the data from these weather stations to smartphones or tablets via dedicated apps. This connectivity ensures that users can monitor weather conditions remotely, offering convenience and flexibility, especially for those on the go.

Moreover, these models typically offer robust data logging capabilities. Users can track historical weather data over time, enabling them to analyze trends and make informed decisions based on past weather patterns. This feature is particularly beneficial for researchers and professionals in agriculture, construction, and environmental sciences.

The S402022H0 and S402022K0 weather stations are also designed with durability in mind. Constructed to withstand various environmental conditions, these devices can function reliably in various climates, making them suitable for both indoor and outdoor use.

In summary, the Oregon S402022H0 and S402022K0 weather stations impress with their comprehensive feature set, technological advancements, and reliable performance. They are invaluable tools for anyone looking to enhance their understanding of their local weather conditions while enjoying the convenience of modern technology.
Top Page Image Contents