NEVER perform any service or repair on your log splitter without first removing the spark plug wire.

ALWAYS perform all recommended maintenance procedures before using your log splitter.

ALWAYS check the level of hydraulic oil and engine oil before operation.

ALWAYS periodically check that all nuts, bolts, screws, hydraulic fittings and hose clamps are tight.

ALWAYS replace all damaged or worn parts immediately.

ALWAYS be sure that all replacement parts meet manufacturer’s specifications.

MAINTENANCE & SAFETY

The hydraulic system of your log splitter requires careful inspection along with the mechanical parts. Be sure to replace frayed, kinked, cracked or otherwise damaged hydraulic hoses or hydraulic components.

NEVER check for leaks of hydraulic fluid with your hand. Fluid escaping from a small hole can be almost invisible. Escaping fluid under pressure can have sufficient force to penetrate skin causing SERIOUS INJURY or even DEATH. Leaks can be safely detected by passing a piece of cardboard over the suspected leak and looking for discoloration.

NEVER remove the cap from the hydraulic tank or reservoir while the log splitter is running. The tank could contain hot oil under pressure which could result in serious injury.

NEVER adjust the hydraulic valve. The pressure relief valve on your log splitter is preset at the factory. Only a qualified service technician should perform this adjustment.

ALWAYS seek professional medical attention immediately if injured by escaping hydraulic fluid. Serious infection or reaction can develop if proper medical treatment is not administered immediately.

ALWAYS be sure to relieve all pressure by shutting off the engine and moving the valve control handle back and forth should it become necessary to loosen or remove any hydraulic fitting.

FIRE PREVENTION

NEVER operate your log splitter near a flame or spark or smoke during operation. Hydraulic oil and gasoline are flammable and can explode.

NEVER fill the gas tank while the engine is hot or running. Allow the engine to cool before refueling.

ONLY refuel your log splitter in a clear area with no gas fumes or spilled gas.

ALWAYS replace the gas cap securely.

If gasoline has spilled, move the log splitter away from the area of the spill and avoid creating any source of ignition until the spilled gas has evaporated.

ALWAYS drain the fuel tank prior to storage to avoid the potential fire hazard.

ALWAYS store gasoline in an approved, tightly sealed container and away from heating appliances. Store the container in a cool, dry place.

Page 5

Page 6 Page 8
Page 7
Image 7
Oregon S402022H0/S402022K0 owner manual Maintenance & Safety, Fire Prevention
Page 6 Page 8

S402022H0/S402022K0 specifications

Oregon S402022H0 and S402022K0 are two advanced weather stations designed for both hobbyist meteorologists and professionals alike. These models are part of Oregon Scientific’s commitment to providing high-quality, reliable weather monitoring solutions that cater to a wide range of users.

One of the main features of the S402022H0 and S402022K0 is their ability to deliver accurate real-time weather data. Equipped with high-precision sensors, these devices can measure temperature, humidity, atmospheric pressure, wind speed, and rainfall. This comprehensive data collection allows users to gain insights into local weather patterns, essential for planning outdoor activities or managing agricultural practices.

Both models stand out due to their user-friendly interfaces, featuring clear LCD screens that display the weather data in an easily readable format. Additionally, these weather stations often come with wireless capabilities, allowing the sensors to communicate with the main unit without cumbersome wiring. This feature enhances the installation flexibility, as sensors can be placed in optimal locations without concern for running wires back to the display unit.

Another significant technological advancement in the Oregon S402022H0 and S402022K0 is support for connectivity with mobile devices. Users can often sync the data from these weather stations to smartphones or tablets via dedicated apps. This connectivity ensures that users can monitor weather conditions remotely, offering convenience and flexibility, especially for those on the go.

Moreover, these models typically offer robust data logging capabilities. Users can track historical weather data over time, enabling them to analyze trends and make informed decisions based on past weather patterns. This feature is particularly beneficial for researchers and professionals in agriculture, construction, and environmental sciences.

The S402022H0 and S402022K0 weather stations are also designed with durability in mind. Constructed to withstand various environmental conditions, these devices can function reliably in various climates, making them suitable for both indoor and outdoor use.

In summary, the Oregon S402022H0 and S402022K0 weather stations impress with their comprehensive feature set, technological advancements, and reliable performance. They are invaluable tools for anyone looking to enhance their understanding of their local weather conditions while enjoying the convenience of modern technology.
Top Page Image Contents