Sound Recording
Once you have entered this mode the icon will keep flashing and “LO” will be shown on screen. “LO” means sound is being recorded during filming. Press Menu 
(one beeping sound) to switch to “OFF”, which means no sound will be recorded.
After “OFF”, it will loop back to “HI” when 'Menu' 
is pressed again. Press the 'Confirm' button 
(one beeping sound) to confirm the setting and to go to the next function icon.
Deleting video footage
To delete the last video footage that was recorded, press the Menu button 
until the LCD screen shows 
. Press the Confirm button 
to confirm. Repeat these two steps to individually delete your files.
Note: After file deletion, the LCD screen will adjust the remaining number of files accordingly.
Delete All Video Footage 
To delete all video footage stored in your camera, press the Menu button 
until the LCD screen shows 
. Press the Confirm button 
to verify. Note: It may take a few minutes to delete multiple files at one time.
19
2
Setting Date/Time (Clock Set) 
Shift to the Date icon in the Menu mode by pressing the Menu button 
repeatedly. When the Date icon is flashing, press the 'Confirm' button 
to change the date and time.
Setting the Year
1.Press the 'Menu button' 
to adjust the last digit of the year 
to verify the last digit.
2.Press the 'Menu button' 
to adjust the 3rd digit of the year 
will then move the cursor to allow you to adjust the
3rd digit of the year. Press the 'Menu' button 
to select the
number and the 'Confirm' button 
to verify, after which you will be able to adjust the month.
Setting the Month
When adjusting the month, the “M” will be shown. Press the 'Menu button' 
to adjust the month. Press the 'Confirm' button 
to verify, after which you would be able to adjust the day and proceed to setting the day.
12
20
