Chapter 6. Configuring the server
This chapter provides instructions on how to configure your server.
This chapter provides information on the following topics:
v“Using the Setup Utility program”
v“Configuring RAID” on page 52
v“Updating system programs” on page 54
v“Using the ThinkServer EasyStartup program” on page 56
v“Installing ThinkServer EasyManage Agent” on page 58
Using the Setup Utility program
The Setup Utility program is used to view and change the configuration settings of your server, regardless of which operating system you are using. However, the operating system settings might override any similar settings in the Setup Utility program.
This section provides information on the following topics to help you use the
Setup Utility program:
v“Starting the Setup Utility program”
v“Viewing and changing settings”
v“Using passwords” on page 50
v“Enabling or disabling a device” on page 51
v“Selecting a startup device” on page 51
v“Advanced settings” on page 52
v“Exiting from the Setup Utility program” on page 52
Starting the Setup Utility program
To start the Setup Utility program, do the following:
1.Make sure your server is turned off.
2.Repeatedly press and release the F1 key when turning on the server. When you hear multiple beeps or see a logo screen, release the F1 key.
Note: If a
The Setup Utility program might start automatically when POST detects that hardware has been removed or new hardware has been installed in your server.
Viewing and changing settings
The Setup Utility program menu lists various items about the system configuration. To view or change settings, start the Setup Utility program. See “Starting the Setup Utility program.” Then, follow the instructions on the screen.
When working with the Setup Utility program menu, you must use the keyboard. The keys used to perform various tasks are displayed at the bottom of each screen.
© Copyright Lenovo 2010 | 49 |
