Lenovo TS200V manual Installing or replacing a PCI card, What to do next

3.Remove the front bezel by releasing the three plastic tabs on the left side and pivoting the front bezel outward.

Figure 7. Removing the front bezel

4.To reinstall the front bezel, align the three plastic tabs on the right side of the front bezel with the corresponding holes in the chassis, then pivot the front bezel inward until it snaps into position on the left side.

What to do next:

vTo work with another piece of hardware, go to the appropriate section.

vTo complete the installation or replacement, go to “Completing the parts replacement” on page 44.

Installing or replacing a PCI card

Attention

Do not open your server or attempt any repair before reading and understanding the “Safety” on page v and the Safety Information book. To obtain a copy of the Safety Information book, go to: http://www.lenovo.com/support

This section provides instructions on how to install or replace a PCI card.

Your server has two standard PCI card slots, one PCI Express x1 card slot, and one PCI Express x16 card slot.

20Installation and User Guide