Lenovo TS200V manual Completing the parts replacement, Installing the rear fan assembly

7.Carefully pull on the tips of the rubber mounts until the new rear fan assembly is secured in place.

Figure 32. Installing the rear fan assembly

8.Connect the new rear fan assembly cable to the system fan connector on the system board. See “System-board internal connectors” on page 14.

What to do next:

vTo work with another piece of hardware, go to the appropriate section.

vTo complete the replacement, go to “Completing the parts replacement.”

Completing the parts replacement

After completing the installation or replacement for all parts, you need to reinstall the server cover and reconnect cables.

To reinstall the server cover and reconnect cables to your server, do the following:

1.Make sure that all components have been reassembled correctly and that no tools or loose screws are left inside your server. See “Internal components” on page 15 for the locations of various components in your server.

2.If you have removed the front bezel, reinstall it. See “Removing and reinstalling the front bezel” on page 19.

3.Make sure that the cables are routed correctly before reinstalling the server cover. Keep cables clear of the hinges and sides of the server chassis to avoid

44Installation and User Guide