Lenovo TS200V manual Internal drives

Internal drives

Internal drives are devices that your server uses to read and store data. You can add drives to your server to increase storage capacity and enable your server to read other types of media. Internal drives are installed in bays. In this manual, the bays are referred to as bay 1, bay 2, and so on.

Figure 5 shows the locations of the drive bays.

Figure 5. Drive bay locations

The following list describes the type and size of the drive that you can install in each bay:

1 Bay 1	- Maximum height: 43.0 mm (1.7 inches)	Optical drive
2 Bay 2	- Maximum height: 43.0 mm (1.7 inches)	Optical drive
3 Bay 3	- Maximum height: 25.8 mm (1.0 inch)	3.5-inch secondary SATA hard disk
		drive
4 Bay 4	- Maximum height: 25.8 mm (1.0 inch)	3.5-inch primary SATA hard disk drive

16Installation and User Guide