Lenovo TS200V manual Removing and reinstalling the front bezel

6.Press the cover-release button on the side of the server and slide the cover to the rear of the server to remove the cover.

Figure 6. Removing the server cover

Removing and reinstalling the front bezel

Attention

Do not open your server or attempt any repair before reading and understanding the “Safety” on page v and the Safety Information book. To obtain a copy of the Safety Information book, go to: http://www.lenovo.com/support

This section provides instructions on how to remove and reinstall the front bezel.

To remove and reinstall the front bezel, do the following:

1.Remove all media from the drives and turn off all attached devices and the server. Then, disconnect all power cords from electrical outlets and disconnect all cables that are connected to the server.

2.Remove the server cover. See “Removing the server cover” on page 18.

Chapter 5. Installing or replacing customer replaceable units 19