Lenovo TS200V manual Installing or replacing a memory module, Installing a PCI card

Models: TS200V

1 96
Download 96 pages 33.69 Kb
Page 39
Image 39
Figure 10. Installing a PCI card

7.Pivot the PCI card latch to the closed position to secure the PCI card.

Figure 10. Installing a PCI card

What to do next:

vTo work with another piece of hardware, go to the appropriate section.

vTo complete the installation or replacement, go to “Completing the parts replacement” on page 44.

Installing or replacing a memory module

Attention

Do not open your server or attempt any repair before reading and understanding the “Safety” on page v and the Safety Information book. To obtain a copy of the Safety Information book, go to: http://www.lenovo.com/support

This section provides instructions on how to install or replace a memory module.

Your server has four slots for installing or replacing memory modules. When installing or replacing a memory module, use the following guidelines:

vUse DDR3 ECC UDIMMs for your server.

vUse 1 GB, 2 GB, or 4 GB memory modules in any combination up to a maximum of 16 GB system memory.

vInstall memory modules in the sequence of DIMM 1, DIMM 2, DIMM 3, and DIMM 4. See “System-board internal connectors” on page 14.

Chapter 5. Installing or replacing customer replaceable units 23

Page 39
Image 39
Lenovo TS200V manual Installing or replacing a memory module, Installing a PCI card