TROUBLESHOOTING
Printer Configuration Report
The Hardware Status section of the Printer Configuration Report reports the following information on the status of the fax modem:
·When the fax modem is installed and working properly, ªInstalledº is reported.
·When not installed, ªNot Installedº is reported.
·If the fax modem has failed, ªFailedº is reported.
The Fax Setup section of the Printer Configuration Report reports the following default fax settings:
Fax mode Reports which mode is currently in place with the fax modem: send and receive, send only, receive only, disabled.
Clock setup Reports the date and time currently set for fax reporting.
Send setup Reports how a fax is to be sent.
Redial countÐReports the number of redial attempts currently in place.
Redial intervalÐReports the time period between redial attempts currently in place.
Transmission resolutionÐReports if the resolution for outgoing faxes is set at fine or standard.
SpeakerÐReports if the speaker is enabled or disabled.
HeaderÐReports if a header is printed on outgoing faxes.
Receive setup Reports how a fax is to be received.
Ring countÐReports the number of rings to allow before answering on incoming faxes.
Input trayÐReports which paper tray is selected as the default input tray for incoming faxes.
Automatic tray switchingÐIf enabled, ªEnable (Trays 4,1,2,3)º is reported.
Output destinationÐReports which default output tray is selected for incoming faxes.
Refer to the ºGetting startedº chapter in the Xerox MRP Family 4220/MRP, 4230/MRP Operator Guide for the procedures to print the report and a report example.
XEROX MRP FAMILY FAX MODEM FOR MACINTOSH OPERATOR GUIDE |
