INSTALLATION
The fax utility does not function correctly in any other setting, because this utility sends PostScript queries to the printer and feed back is returned only in the AppleTalk PostScript mode.
2.Make a backup copy of the program disk. Store the original disk in a safe place and use the backup copy.
3.Make sure you have at least 373 KB available on your hard disk to store the fax utility software.
4.On your hard disk, create a new folder for the fax utility software. You may name it anything you wish.
5.Copy these files from the backup disk into the folder you just created:
ÐBuild Fax Driver
ÐFax Printer Utility.
Installation procedure
Follow these steps to install the fax utility software files:
1.Open the folder that you created for the fax utility and
A message displays in the Dialog box informing you that this application builds a fax printer driver from the LaserWriter driver currently installed. At this point you may continue, or click on the [Cancel] button to abort the installation.
2.Click on the [Build] button to continue with the installation.
A message displays indicating that the fax printer driver is being built.
If the installation is successful, a file named Fax Printer is created and placed in your System folder (if you are running System 6) or the Extensions folder within your System folder (if you are running System 7).
If the installation is not successful, the partially built driver is deleted. If installation is not successful because your virus checker prevents the build program from modifying your printer driver, refer to the documentation that came with your virus checker for information on removing or disabling the program. Then repeat the steps above.
N Note: If you have a virus checker such as SAM_Intercept, the system may display a message prompting you to Allow, Deny, or Learn the changes that are about to occur to your system. Click on [Allow] as many times as necessary to continue installation.
When the installation is complete, a message displays that the fax printer driver has been successfully built and may be selected using the Chooser.
3.Click on the [OK] button.
4.Select Chooser from the Apple menu. The Chooser window displays.
XEROX MRP FAMILY FAX MODEM FOR MACINTOSH OPERATOR GUIDE |
