Oregon Scientific BAR289 user manual Weather Forecast, Temperature, Backlight, Reset System, Icon

EN

WEATHER FORECAST

This product forecasts the next 12 to 24 hours of weather within a 30-50 km (19-31 mile) radius. The forecast is based on barometric pressure trend readings.

The LCD display shows an animated icon indicating the forecasted weather.

WEATHER FORECAST ICONS

ICON	DESCRIPTION
	Clear
Day / Night
	Partly cloudy
Day / Night
	Cloudy
	Rainy
	Snowy

NOTE The night time icon displays from 6 PM to 6 AM.

TEMPERATURE

This product can display maximum, minimum and current temperatures collected by the remote sensors and main (indoor) unit.

MAXIMUM / MINIMUM RECORDS

•Press MEMORY to toggle between maximum (MAX), minimum (MIN) and current records.

•To clear the records, press and hold MEMORY for 2 seconds. A beep will sound to confirm that the memory has been cleared.

SELECT MEASUREMENT UNIT

Press the °C / °F button to choose the setting you want.

The display can show indoor temperatures ranging from -5°C to +50°C (23°F to +122°F).

8

BACKLIGHT

To turn on the backlight for 5 seconds:

•Press MODE / LIGHT on the main unit.

OR

•Press on the remote control.

NOTE When appears, the backlight function is deactivated due to low-battery power. Replace with new batteries to operate this function again.

RESET SYSTEM

Insert a thin blunt instrument into the hole below RESET to return to the default settings.

NOTE When you press RESET, all settings will return to default value, and you will lose all stored information.

REMOTE CONTROL (RE289)

The remote control interacts with the main unit using infrared technology.

The buttons on the remote control complete the same functions as the buttons on the front of the main unit. Refer to the following list of functions and see the relevant section headings for further information:

•Manually view 1 of 5 sensor channel's data or view each channel for 3 seconds using auto-scan - see "Select Sensor Channel".

•Force a manual search for the RF clock reception - see "Radio-Controlled Clock".

•Enable / disable the radio-controlled clock - see "Turn Radio-Controlled Clock On / Off".

•Manually set the clock, calendar and day of the week language - see "Set Clock".

•View the 5 different clock displays - see "Switch Clock Display".

•View the alarm settings, set the alarm, activate the alarm and silence the alarm - see all of "Alarm" section.

•View temperature records - see "Maximum / Minimum Records".

NOTE The sensor auto-search function cannot be operated by the remote control.

NOTE The main unit must be no more than 4 metres (13 feet) from the remote control for a successful connection to take place. Point the remote control directly at the infrared window on the main unit for optimal performance. The remote control cannot perform when there is an obstacle between the 2 units.

BAR289 ENG R7 OP 8 8/20/04, 11:00 PM

Black